Ecler AmicLab Bedienungsanleitung PDF herunterladen (Seite 83)

6. TECHNICAL CHARACTERISTICS

6. CARACTERÍSTICAS TÉCNICAS

6. CARACTÉRISTIQUES TECHNIQUES

6. TECHNISCHE DATEN

HARDWARE (.amic) Measuring .amic as a independent device

Processing:

A/D & D/A 24 bit, 48kHz

DSP 48 bits

Latency 0.585ms

Input / Output: 2 Inputs (internal) / 4 outputs (2 internal & 2 external)

Input Levels: Nominal / Maximum 0dBV / +12dBV

Input attenuator: Stepless from -84dB to +12dB

Input Impedance: Balanced, 30k

Stack Output impedance: 300 balanced

CMRR (20Hz - 20kHz): >60dB

Distortion @ 0dBV 20Hz-20kHz: <0.008%

Frequency Response (-0.3dB): 10Hz - 20kHz

Noise from 20Hz to 20kHz: below -105dB

Crosstalk (20Hz-20kHz): better than -60dB CH1 to CH2 & Stack1 to Stack2

Maximum Delay: 910ms (312.5m) global for all 4 channels.

Delay resolution: 20.83µs (7mm)

Compressor / Limiter:

Threshold from -48dBV to +12dBV

Ratio 1:1 to :1 (limiter)

Attack time Auto or from 0.1ms to 150ms.

Release time Auto or from 1ms to 5s.

High & Low pass Crossover filters Butterworth in 6/12/18/24dB/oct.

Bessel in 12/18/24dB/oct

Linkwitz-Riley in 12/24dB/oct.

Parametric Eq types (10 max. per output) -Bypass

-Param. Eq. 20Hz-20kHz; -60/+12dB; Q from =.3 to 200

-Low & High Shelf 6/12 dB/oct

-Low & High Pass 6/12 dB/oct.

-All-Pass 1/2 order

Built In signal generator -Sine (20Hz to 20kHz)

-Polarity(20Hz to 20kHz)

-White

-Pink

Signal Mute Yes

Signal Polarity Invert Yes

Analog Volume remote control (0-10VDC) 0V.= no attenuation (0dB)

+10V. = full attenuation (-.)

Connectivity: USB1.1 (2.0 compatible). Can provide supply to .amic

while programming

Dimensions 143x75x30mm

Weight 230g.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Ecler AmicLab Bedienungsanleitung Seite 83

Kommentare zu diesen Handbüchern